Heath-consultants Detecto Pak-Infrared (DP-I) Bedienungsanleitung PDF herunterladen (Seite 7)

102105-0 DP-IR MANUAL REV M

Page 7 of 35

Detection Method: Infrared Controlled Interface Polarization Spectrometer

Measurement Range: 0-100,000 PPM

1-100% Gas

Display Range: Auto Ranging: Manual Ranging:

PPM: 0-10,000 PPM scale: 0-10,000

% Gas: 1-100% % Gas: 0-100%

Sensitivity: 0-1000 PPM: 1 PPM

1000-10,000 PPM: 5 PPM

1-100% Gas: 0.5%

Accuracy: Greater of +/- .5% or +/- 10% of reading (typical, std conditions)

(% Gas on manual mode)

Detection Alarms Modes: Digital Methane Detection (DMD):

Audible tone when detection threshold is exceeded

Adjustable Alarm Level from 1 to 9000 PPM

Tick:

Continuous audio tone relative to concentration

System Fault Warning: Audible tone and indication on the display

Self-Test & Calibration: Built in Self-Test and Calibration function veries operation and

adjusts calibration for maximum sensitivity. Test gas cell integrated

within the instrument.

Compliance: EN 61326-1

Conducted Emissions Class B EN 61326-1

Radiated Emissions Class B EN 61000-4-2 4kV/8kV

ANSI C63.4 Class B EN 61000-4-3 3 V/M

FCC 47 CFR Part 15 Class B

Dust Filter: Replaceable lter provides dust protection. Easy change out quick

disconnect lter cap.

Display: Large easy to read backlit LCD (.75” Numeric)

Operating Temperature: 0 to + 122° F (-17 to 50° C) (nominal battery voltage)

Humidity: 5 to 95% RH, non-condensing

Enclosure: IP54 (Water splash and Dust resistant)

Instrument Weight: 5.6 lbs.

Carrying Case: 13 lbs. empty; 21 lbs. lled

24.5” x 21” x 9”

Power Supply: Internal rechargeable Li-ion battery or

External 12 VDC car battery with optional power conditioner

Battery Operating Life: 8 hours at 32° F with out backlight on

Battery Charger: External, in-line, 110 - 240 VAC, 50/60 hertz. 10 hours to 90%

charge

Shoulder Strap: Single over the shoulder padded strap

Speaker Volume: 108 dBs @ Alarm port (A-fast)

Survey Probe: Quick connect tting with locking clasp. Adjustable length from

25” to 41”

Bar hole Probe: Std: 20”; Optional 36”

Intrinsic Safety: Class 1 Division 1 Group D T3

UL 913 MetLab #E112840

CHAPTER I

DP-IR System Specications

1 2 3 4 5 6 7 8 9 10 11 12 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Heath-consultants Detecto Pak-Infrared (DP-I) Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Heath-consultants Detecto Pak-Infrared (DP-I)