Heath-consultants Heath Volume Corrector (HVC) Bedienungsanleitung PDF herunterladen (Seite 13)

Configure 1 Screen

* Meter Drive (Input Scale Factor)= (X1, X5, X10, X100, X1,000, X10,000) Should correspond to the

amount of uncorrected gas per revolution of the meter.

* Uncorrected Volume Display Scale Factor= (X1, X5, X10, X100, X1,000, X10,000) Sets the scale

for all Uncorrected volume displays throughout the system (LCD, Display1, Profiler etc.)

* Corrected Volume Display Scale Factor= (X1, X5, X10, X100, X1,000, X10,000) Sets the scale for

all Corrected volume displays throughout the system (LCD, Display1, Profiler etc.)

* Uncorrected Volume= (Manual entry) Sets the reading of the Uncorrected accumulator (Usually this

reading matches the mechanical index reading to ensure proper counting).

* Corrected Volume= (Manual entry) Sets the reading of the Corrected accumulator (Changing this

reading will not affect the hourly recording in the “Hourly Profiler”.

* Uncorrected Volume/ Display 4-7 digits = Sets the amount of digits to be displayed on the LCD.

Otherwise referred to as “Electronic masking” of the LCD.

* Corrected Volume/ Display 4-8 digits = Sets the amount of digits to be displayed on the LCD.

Otherwise referred to as “Electronic masking” of the LCD.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Keine Kommentare

Heath-consultants Heath Volume Corrector (HVC) Bedienungsanleitung Seite 13